This is not finished. I want to make little copper or aluminum plaques for the controls. Then epoxy coat the entire thing. This is also the first and only pedal I have painted so far. I used a pewter hammer texture paint and a nice blue. I put alternating layers to get this effect. I plan to epoxy coat the plaques onto the top when it is finished.
Controls
- Low Cut – Attenuates low frequencies
- Gain Trim – Controls the gain of the unit
- Level Low – Controls the overall output volume in Low Gain mode
- Level High – Controls the overall output volume in High Gain mode
- Gain Low (Internal Trimpot) – Sets the Gain in Low Gain mode
- Gain High (Internal Trimpot) – Sets the Gain in High Gain mode
- Voltage (Toggle Switch) – Selects between 9V / 27V operation
- Active/Bypass (Foot Switch) – Activates/Bypasses the pedal
- High/Low Gain (Foot Switch) – Selects between High Gain / Low Gain modes
Build Gallery
