Create a 3PDT Breakout PCB for Manufacture

3 minute read

So I have been building pedals for a little over a year. In that time I have always hand wired my switches unless the breakout boards were supplied with the ...

Drilling and Finishing Enclosures

less than 1 minute read

I had just received some UV printed enclosures from Tayda Electronics and I wanted to make a video of me finishing them. I make some mistakes along the way b...

Epoxy Resin Finish

less than 1 minute read

I hand paint most of my enclosures with acrylic paint pens. The paint is fragile until baked but even then I like to have more protection. I like to user pou...

Debugging a Pedal Build

less than 1 minute read

I had put together a tutorial on designing a test box for my builds. You can see it here.

Templates

6 minute read

This is the place where I will put templates that I hope will help people build and produce art for their pedals. All you have to do is right lick on the lin...

Designing a Test Box

3 minute read

I built this after see a few things on forums over the last couple of months.

Creating Art - The Hummingbird

1 minute read

I’ve had a couple of questions about how I paint my pedals. Here’s a quick set of photos that show the steps. I hope this is helpful. Feel free to ask any ...

Creating a PDF for Tayda UV Printing

6 minute read

I go over using the opensource Inkscape and the $49.99 US Affinity Designer to create PDF for UV printing at Tayda Electronics.